Toyana 7318 C-UO angular contact ball bearings

Min operating temperature, Tmin:-60 °C; Mass:0.6 kg; Fatigue limit load, Cu:1.41 kN; d:70 mm; D:110 mm; Nlim (grease):6,100 rpm; f0:15.6; Dynamic load, C:38 kN; Da max:103.5 mm; ra max:1 mm;

Characteristic rolling element frequency, BSF:4.07 Hz; Characteristic inner ring frequency, BPFI:4.93 Hz; Mass:0.46 kg; ra max:1.5 mm; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:3.07 Hz; Fatigue limit load, Cu:1.13 kN; Nref:9,900 rpm; D:80 mm; da max:46.2 mm;

Bearing Part Number:6903; Type:Bearings with Housin; Width T(mm):35 ～ 70; Flange O.D. H(φ):60; Seals:DD (Contact Rubber S; RoHS:6; Bearing Retained:No; Number of Bearings:Double; Days to Ship:7 Days; Bearing I.D. d(mm):17;

Holder Surface Treatment:Clear Anodize; Bearing Retained:No; Housing Material:[Aluminum Alloy] 201; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Flange Shape:Square Type; Shape:Flange Type; Number of Bearings:Double; Bearing Retained:No;

Surface Treatment:Black Oxide Coating; RoHS:6; Application:For Outer Ring; Material:Low Carbon Steel; Application:For Outer Ring; L Dimension Tolerance:Positive Tolerance; Days to Ship:7 Days; L(mm):3 ～ 50; O.D. D(φ):17;

Load Direction:Radial; Combination symbol:DF; Contact angle symbol:C; Basic Dynamic Load Rating(N):103000; Size Standards:Metric System; Rolling Element Material:Steel; D:100; Days to Ship:Quote; Preload Mark:/GN; Max. Allowed rpm(rpm):6200;

Flange Shape:Square Type; Flange O.D. H(φ):57; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Bearing Material:[Steel] Steel; RoHS:6; Shape:Flange Type; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:6902; Housing Material:1045 Carbon Steel;

d:50 mm; L:116 mm; B:49.2 mm; N:18mm; Recommended tightening torque for set screw:11.5 Nm; S:24.6 mm; J:157 mm; H:190 mm; B1:62.7 mm; T max.:100 °C;

Bearing Unit, Type:Take-Up Type; RoHS:6; Surface Treatment:No; Bearing Unit, Type:Take-Up Type; Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; d:55; Seal:Silicone; Fit:J7; Diameter series symbol:Used for Light load;

S:6.5 mm; d:15 mm; C:9.55 kN; N:11mm; Recommended tightening torque for set screw:5.5 Nm; Z:56.3 mm; B1:28.6 mm; Designation of closed end cover:SCCE203; d1:27.2 mm; H2:54 mm;

Shape:Bottom Mount; Number of Bearings:Single; Bearing Material:Stainless Steel; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Lateral Width L(mm):34; Bearing I.D. d(mm):6; Height H(mm):20 ～ 30; Housing Material:304 Stainless Steel;

Rolling Element Material:Steel; Size Standards:Metric System; Type:Angular Contact Ball; Retainer Type:Punching; Load Direction:Radial; Number of Raceway Ring Rows:Single Row; Outer Ring Shape:Flat; Outer Ring Shape:Flat; Types:7*** series; Days to Ship:Same day;

Bearing Retained:Yes (with retaining; Number of Bearings:Single; Type:Bearings with Housin; Shape:T-Shaped; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Height In

C:52.5 kN; B:53.7 mm; d:61.91 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; Designation of bearing:US212-39G2; C0:32.8 kN; J:184 mm; H1:25 mm; H:69.8 mm;

RoHS:6; Type:Bearings with Housin; Width T(mm):40 ～ 60; Bearing I.D. d(mm):10; Bearing Retained:No; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Black Oxide Coating;